基于网络的智能精密压力传感器原理与应用

基于网络的压力传感器是由压敏电阻传感器、A／D转换器、微处理器、存储器和接口电路构成的，它能实现各传感器之间、传感器与系统之间的数据交换和资源共享。本文介绍PPT系列、PPTR系列网络化智能精密压力传感器的工作原理与典型应用。     

关家堡地区第三系精细构造解释与构造特征分析

在大港滩海关家堡地区利用三维地震资料与测井资料结合,实现了地震解释剖面上层位准确标定,在此基础上开展了构造精细解释。对工区内断裂组合形式、构造特征进行了深入研究,针对隐蔽小断层、低幅度构造采用多种地震综合解释技术,完成了工区内70km2三维地震资料精细解释工作,7个主要目的层位的高精度深度构造图,发现多个新的有利圈闭,为下步井位部署提供了有利依据。     

纯铜双层辉光离子渗钛组织形成机理及性能分析

采用双层辉光离子渗金属技术对纯铜进行了渗钛处理。用配有能谱仪(EDS)的扫描电子显微镜(SEM)、X射线衍射仪和透射电子显微镜对合金层的显微组织形貌、钛含量分布、相组成及相结构类型进行了观察与测定，对合金层的形成机理进行了探讨，并对其性能进行了对比测定。结果表明：渗钛层由合金层和扩散层组成，合金层主要由TiCu (Cu)固溶体 TiCu4构成，TiCu4为Dla型有序相，TiCu为B2型有序相，扩散层为(Cu)固溶体。渗钛处理后纯铜的表面得到显著强化。     

Improving Measurement Precision of Test Batteries Using Multidimensional Item Response Models.

A conventional way to analyze item responses in multiple tests is to apply unidimensional item response models separately, one test at a time. This unidimensional approach, which ignores the correlations between latent traits, yields imprecise measures when tests are short. To resolve this problem, one can use multidimensional item response models that use correlations between latent traits to improve measurement precision of individual latent traits. The improvements are demonstrated using 2 empirical examples. It appears that the multidimensional approach improves measurement precision substantially, especially when tests are short and the number of tests is large. To achieve the same measurement precision, the multidimensional approach needs less than half of the comparable items required for the unidimensional approach. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

提高结晶器漏钢预报专家系统准确率的措施

通过对影响结晶器专家系统漏钢预报准确率的原因进行分析，实施了相应的改进措施，取得了良好的效果。     

有机电沉积涂料的新动向

阴极电沉积涂料是 2 0世纪 70年代以来发展起来的一种新的涂装方法 ,具有挥发性有机物 (VOCs)和有害空气污染物(HAPs)含量低、防蚀能力强、漆膜质量好、涂料利用率高、适合涂装结构复杂的构件和设备等特点。介绍了近年来阴极电沉积涂料研发的新动向。它们主要集中在有机双层电涂和高分子 聚电解质 /低聚物电解质复合物多层电涂体系 ,这些新的电涂体系在涂料的稳定性以及涂层的物理化学性质和力学性能方面具有明显的改进。     

Low-resistance polysilicon process in contact application for high density devices

For the lowest resistance, it is required to have the epitaxial silicon contact between the silicon plug and the substrate and good step coverage at the high aspect-ratio contact holes, simultaneously. In this work, a double polysilicon (DPS) deposition technique was proposed for the requirements. The first, thin silicon layer is deposited in a single-wafer process chamber with an in-situ H₂-RTP (rapid thermal process) treatment for the epitaxial contact, and the second silicon layer is formed in a batch-type furnace for good step coverage. From chain resistance, Kelvin R_c, and current-voltage (I–V) measurement, the DPS process meets both low resistance and good uniformity, so that it suggests a breakthrough in the small-sized, semiconductor device application.     

EXPERIMENTAL RESEARCH ON RADIATION FROM DOUBLE CYLINDRICAL STRUCTURES

1. INTRODUCTION Induced by unbalanced mechanical forces and moments, underwater structures vibrate and radiate The main form of underwater structures, such a submarine, is reinforced double cylindrical structure immersed in water, with fluid media filled between th double cylindrical shells. In essence, this is a coupling problem between fluid and structure. Multipl methods have been used to estimate radiation leve from underwater structures[1-9]. Musha[10] and Chertock[11] estimate the …     

NUMERICAL STUDY ON SORET-EFFECT AND DUFOUR-EFFECT FOR DOUBLE-DIFFUSIVE NATURAL CONVECTION IN POROUS ENCLOSURE

The influences of Soret effect and Dufour effect on the natural convection and heat and mass transfer for a porous enclosure were investigated by means of the penalty finite element method. Numerical results indicate that the Soret and Dufour effects have significant influences on heat and mass transfer in the presence of large temperature gradient and concentration gradient.     

一等环规测量仪的研制

一等环规测量仪是将激光干涉仪测长技术、静态光电显微镜瞄准技术和精密微位移定位技术作为主体测量技术，以上三项技术的有机结合使该仪器的测量不确定度达到了国际法制计量组织(OIML)规定的一等环规的测量要求。